Touch Injection

Navigation:  Widget Designer > Nodes > Interaction Nodes >

Touch Injection

prev main next

Navigation:  Widget Designer > Nodes > Interaction Nodes >

Touch Injection

prev main next

Please wait. Due to its content this page might take a while to load...

With the Touch Injection Interaction node you may send touch data to a dedicated Output of a Site. The touch data is injected there meaning that it is as if it was generated on the remote machine using a connected touch screen for instance.

wd_nodes_interaction_touch-injection


 


Set up the Site ID and Output ID from the Master or Client that you like to send the data to.


Decide whether the data should be injected to the Output or the Composition pass. More information...


Tick the according check-box for each tool that should generate touch data.

Choose between
- "1:1" to keep the resolution as on your local screen and
- "Re-Map" with more settings to send other coordinates to the remote computer. This is not only of interest when the screen resolution of the systems you inject input events in is different to the local resolution. But also when the resolution is much higher due to more outputs. In case the outputs are softedged you need to set up two Injection nodes with different source and target coordinates.


Lastly, you may set up what mode generates a click.

 

Tick the check box "Mute Node on Page Change" if the node should not process and output data when another page is active.