PB Device Control Output

Navigation:  Widget Designer > Nodes > Output Nodes > Pandoras Box Output >

PB Device Control Output

prev main next

Navigation:  Widget Designer > Nodes > Output Nodes > Pandoras Box Output >

PB Device Control Output

prev main next

Please wait. Due to its content this page might take a while to load...

The Device node allows controlling any Pandoras Box Device with any parameter name in both, absolute or relative mode.

_img861

Node Properties:

Device ID:
Enter the Device ID, e.g. 1 in the first text field and 2 in the second text field. This will control Layer 2 of Site 1.

Absolute / Relative:
Choose absolute or relative mode. In absolute mode the PB device will take the input value, in relative mode the input value will be added or subtracted to the PB device parameter's value.

Parameter:
Choose the parameter you want to control from the list.

Input:
Choose the input source from the list that should provide the values.

Multi-Site:
In order to control several devices simultaneously the Multi-Site option can be used instead of adding a second PB Device Control Output Node. To do so please tick the check box and enter the amount of sites.

Example:
To control Layer 1 of Site 1 and Layer 1 of Site 2, enter “1” “1” in the text fields for the Device ID.
Enable the Multi-Site option and enter the amount of sites: “2”.
To control Layer 1 of Site 2 and Layer 1 of Site 3, enter “2” “1” in the text fields for the Device ID and “2” for the Multi-Site Count.

Tick the check box to Mute Node on Page Change.