LCD Menu

Navigation:  Hardware and Accessories > Server Hardware >

LCD Menu

prev main next

Navigation:  Hardware and Accessories > Server Hardware >

LCD Menu

prev main next

Please wait. Due to its content this page might take a while to load...

The LCD Menu is included in the Pandoras Box Servers, it cannot be purchased as an optional features.

Status Display

The top level menu of the front panel LCD display is the status display.

_img5010

The status displays indicates:

The units IP address of the “Lan” adapter

Output1 Resolution

The units IP address of the “Lan2” adapter

Output2 Resolution

The units computer name

Free hard disc space

By pressing the encoder once you will enter the main menu.

Main Menu

From the main menu you may access several sub menus: Use the encoder to navigate through the menu entries and press the encoder to enter each of the sub menus. Press STATUS to return to the top level status menu.

_img5011

Lan1 & Lan2 - Network Menu

The network menu allows you to quickly change the unit's IP address and subnet mask settings as well as the DHCP enabled-setting of the unit.

_img5012 

Use the encoder to navigate through the network menu and turn the encoder to set the individual settings.
Please note that applying changes to the network setting may take several seconds until the unit is ready to proceed.
Press CANCEL to return to the main menu without changes.

Output Menu

The output menu gives you a direct access to the available default resolutions.

_img5013

Use the encoder to navigate and choose from the list of display modes.
To enable Output2 please make sure that the check box next to Output2 is checked in order to setup both outputs.

Please note:  The current version of Pandoras Box Server supports only matching resolutions on both outputs.

For more advanced resolution and refresh rate setups please use the onscreen menu to open the Output Nvidia Control Panel window.

Press CANCEL to return to the main menu without changes.

Pattern Menu

When working offline (i.e. neither Pandoras Box Master or Client is running) you may assign test-patterns to the outputs.

_img5014

Press MENU to return to the main menu, the last selected pattern will stay active until it is changed or rebooted.

Playback Menu

The functions of the playback menu are enabled when Pandoras Box is in Master mode in order to control the timeline. When working in Master mode, the playback buttons are enabled as well.

_img5015

- Press PLAY to run the timeline.
- Press STOP to reset the timeline to 00:00:00:00
- Press LAST to jump to the last cue available
- Press NEXT to jump to the next cue available
- Edit GOTO TIME lets you enter a specific timecode to jump to after you entered all value in hh:mm:ss:ff format
- Edit GOTO CUE lets you enter a specific cue number to jump to.
- Press MENU to return to the main menu.

Mode Menu

The mode menu defines which version is loaded for the onscreen menu buttons. It also determines which Master or Client mode to choose if multiple revisions are installed on the unit.

_img5016

In the top scroll list you may choose one of the installed revisions.

Choose the mode you want to start by clicking on either Master or Client.

To start a chosen mode, select START.
To close a running Master or Client, choose CLOSE. 

Press MENU to return to the main menu.

Display Menu

The display menu lets you setup both brightness and contrast of the LCD display.

_img5017

Press MENU to return to the main menu

Shutdown Menu

The Shutdown Menu lets you either shutdown or reboot the unit.

_img5018

Press MENU to return to the main menu.