MA PSN Output

Navigation:  Widget Designer > Nodes > Input Nodes > Devices Input > ID Tag Tracker Input >

MA PSN Output

prev main next

Navigation:  Widget Designer > Nodes > Input Nodes > Devices Input > ID Tag Tracker Input >

MA PSN Output

prev main next

Please wait. Due to its content this page might take a while to load...

This topic explains the section "MA PSN Output" of the ID Tag node, for general information about IR ID tracking and links to other chapters please see the topic ID Tag Tracker.

wd_nodes_input_id-tag-tracker_ma-psn-output

This section includes settings for the PSN data output. The PosiStageNet protocol is for example supported by MA Lighting consoles; more information can be found on www.posistage.net.
In general PSN needs to be activated in the Connection Manager where you can also find other settings like the IP and port for the PSN MA Tracking Server.

Enable

This outputs the X-,Y- Z-coordinate of each tag.

Inv XYZ and Swap

The coordinate system on which the tag positioning is based can be set up in two steps.

First is when calibrating the cameras, second is in the section "3D Tracking Settings". Both influence the values for a tag in Widget Designer. However, if the lighting system uses a different coordinate system, you can change the position for the tags only for the PSN output without the need to adjust Widget Designer or Pandoras Box.

You may invert the orientation of each axis, or even change the XYZ order into a YXZ one, for example.