COM Port Output

Navigation:  Widget Designer > Nodes > Output Nodes > Connections Output >

COM Port Output

prev main next

Navigation:  Widget Designer > Nodes > Output Nodes > Connections Output >

COM Port Output

prev main next

Please wait. Due to its content this page might take a while to load...

The Com Port Message value acts like an if node, the incoming data can be compared and depending on the true or false result a dedicated ASCII or Byte packet can be sent to the local COM Port. Set up its ID in the Connection Manager.

_img849

Node Properties:

COM Connection ID:
Enter the COM Port Connection ID.

Update:
Choose if the output should be updated either "On Change of Input Value Only" or permanently.

If:
Choose the first input node from list or enter numeric value. This input will be compared to the second input.
Choose the Operator.
Choose the second input node from list or enter numeric value.

Then send:
If the operation is True, this input node value or entered numeric value will be given out as Output Value.

Else send:
If the operation is False, this input node value or entered numeric value will be given out as Output Value.

Tick the check box to Mute Node on Page Change.