Art-Net Output

Navigation:  Widget Designer > Nodes > Output Nodes > Connections Output >

Art-Net Output

prev main next

Navigation:  Widget Designer > Nodes > Output Nodes > Connections Output >

Art-Net Output

prev main next

Please wait. Due to its content this page might take a while to load...

The Art-Net output node allows to assign incoming source values to multiple 8 or 16bit DMX output Channels on a given Art-Net Subnet and Universe.
Simply type in all DMX start addresses and use a white space in between them i.e.:1 2 123.
The Art-Net output node updates Art-Net only on change of the input value.

_img847

Node Properties:

Tick one of the check boxes to give out either 8bit or 16 bit DMX values.

Art-Net Subnet, Universe:
Set here the Art-Net Subnet and Universe.

Channel:
Set here the DMX channel. To send Art-Net to multiple channels, use a white space in between the channel IDs, e.g. 1 2 509.

Value:
Please choose one of your incoming source values.

Highspeed Mode (60 Hz):
Enable this option to use the Highspeed Mode that does a refresh rate of 60 Hz (Default is off)

Please note:
The Highspeed Mode is not supported by GrandMA consoles.

Tick the check box to Mute Node on Page Change.