Please wait. Due to its content this page might take a while to load...
The Counter input node can be set up to continuously count a certain value range in a given amount of time.
The counter can also be set to bounce up and down.
Set the amount of time.
Set the value range.
To get a counter that counts continuously in 5 seconds from 0 to 5 enter for Time=5000 ms and for Range=5.
To get a counter that counts continuously in 5 seconds from 0 to 10 enter for Time=5000 ms and for Range=10.
To get a bouncing counter (counting continuously from 0 to X and back to 0 etc.) please tick the Bounce check box.
The Node generates the following output:
- Counter Value.